Safety Products and Climbing Gear and Equipment from JL Matthews Co. for Lineman, Arborists, Climbers and First Responders
   
 
   
 
 
spacer
Sales 800-421-3360       Customer Service 817-924-3360
spacer
KLEIN LINEMAN KITS

Lineman Kits with Klein based products.

Klein Lineman Kit is only available in a premium configuration.

It is important that you read and understand all OEM's breaking strength, safety, technical data, inspection & maintenance instructions relating to all of the equipment & tools.

Failure to do so could lead to serious injury or even death.

Lineman_Kit_klein_lrg.jpg
Klein_150px.gif
KLEIN PREMIUM LINEMAN KIT
Part No: Klein-PLK

We have selected these items as premium equipment needed for a lineman. The kit contains all of the items shown here.

Tool Bag - No. 5180

Orange vinyl-coated nylon fabric bag. Bottom extends 3" (76 mm) up the sides. Bottom of bag is protected by metal studs. Bottom reinforced with 1/4" (6 mm) plywood. Nylon-web handles extend around bag for extra support. Wide opening steel frame is securely riveted in top of bag. Extra flap for storm protection.
Size: 24" x 10" x 18"
Wt: 6 lb.

Tool Belt - No. 5278N

This is Klein's best full floating belt. Forged circle D-rings have corrosion-resistant finish and are proof-loaded to meet OSHA requirements. Long-lasting 1-1/2" (38 mm) wide double-riveted leather tool loops. Four suspender rings, tape thong, two-way knife snap, and glove-bag ring. Latigo-leather belt pad is laced and stitched with two pocket tabs. Rolled-edge leather belt cushion for comfort when leaning back. 5" (127 mm) overall width. Padded for maximum comfort and body fit. 1-3/4" (44 mm) wide Klein-Kord® belt strap covered with top-grain harness leather for long-lasting use. Full-floating D-ring web strap with straight double-bar D-rings.
Note: Klein body belts are for positioning applications only and should not be used alone as a personal fall-arrest system (per OSHA 1926 Subpart M).

NOTE: Make sure to select the tool belt "D" size upon ordering.

Lineman Belt Adjustment in Inches per ASTM F887

D Size Min." Center Hole" Max." Tool Loops
D18 32 36 40 3
D19 33 37 41 3
D20 34 38 42 3
D21 36 40 44 4
D22 37 41 45 4
D23 38 42 46 4
D24 40 44 48 4
D25 41 45 49 4
D26 42 46 50 4
D27 44 48 52 4
D28 45 49 53 4

Never carry wire, tools, or anything other than the positioning strap in the D-ring of a tool belt. Foreign objects carried in the D-rings may cause the snap to malfunction, and accidental disengagement to occur.

Nuts & Bolts Bag - No. 5142

A Klein canvas utility bag. Heavy No. 8 canvas. Top edge reinforced with 1/4" (6 mm) rope. Metal snaps provided on loops for easy attachment to belts up to 3" wide (76 mm). Ventilating eyelet in bottom.
Size: 9" L x 10" W (top opening 8") x 3" D
Wt: 0.6 lb.

Tools Holster - No. 5118C

Klein leather tool holster. No exposed rivets in back. Riveted to assure long life. Pockets for 7", 8", and 9" side-cutting pliers, most screwdrivers, 6' folding rules, and open end wrenches from 9/16" to 13/16". Nickel plated alloy snap.
Size: 6-1/2" x 11"
Wt: 0.8 lb.

Pole Strap - No. KG5295-6L

6' long positioning strap by Klein. # Made of 6-ply, 1-3/4" (45 mm) wide Klein-Kord®, an exceptionally strong, flexible fabric. Elongated 6-1/2" (165 mm) snap hook is easy to use with even the thickest gloves. Internal lock mechanism. Snap hook has 5,000 lb. proof-loaded rating. Red wear indicator in center of strap alerts user when strap needs to be replaced. Meets or exceeds applicable OSHA requirements and ASTM and CSA standards.

Climber - No. CN1972AR

A Klein Climber. Comes as a complete set with straps and pad. 8" x 8" (203 x 203 mm) cushioned, high-grade leather climber pads for maximum comfort. Neoprene-impregnated nylon climber straps for long-lasting life. Secure sleeve and leg iron connection. Two slotted hex-head bolts with lock washers and barrel-type nuts join the steel sleeve and leg iron together. Steel split ring secures ankle strap in place and allows for quick replacement. 4-7/16" (113 mm) wide stirrup provides greater foot support. Adjustable climber length – steel sleeve moves in 1/4" (6 mm) increments for the most comfortable fit. Contoured leg irons help position gaffs securely and comfortably. Replaceable gaff firmly attaches to the leg iron with a center pin and two TORX® screws. C.C.A. pole gaff. Designed to penetrate the hardest salt-treated poles.
Wt: 6 lb.

Gaff Guard - No. 1972G

Klein's Snap-On Gaff Guard. Coil-spring, plastic coated guard quickly snaps onto pole climbers.




$949.00
Select Belt Size

Quantity:

 
Untitled 1
Follow JL Matthews Co. on Twitter Find Us on Facebook

Sixty Plus Years!
 
Untitled 1

Some of Our Product Lines

 
Untitled 1
Plus Many Others
 
Untitled 1

| MAIN PAGE | STORE FRONT | SPECIALS | REPAIR SHOP | SIGN IN | REGISTER | GIFT CERT. | CONTACT | CATALOG | ABOUT | LEGAL STUFF | RETURNS | WARRANTY |

© 2010 J. L. Matthews Co. Inc.  ≈≈  All Right Reserved

a BizProNet design